The HZXD-II is a general-purpose rechargeable battery internal resistance analyzer designed to measure the internal resistance, voltage, and temperature of rechargeable batteries such as lead-acid and lithium batteries. It serves as a reliable instrument for assessing battery health status and can also be used for measuring the Equivalent Series Resistance (ESR) parameters of electrolytic capacitors (for reference only).
This instrument employs the AC 4-terminal testing method to measure battery internal resistance, ensuring accurate measurements unaffected by contact resistance between test leads, terminals, and battery electrodes. It features data storage, data retrieval, alarms, and automatic shutdown. The device is sophisticated in design, broad in measurement range, high in resolution, easy to operate, portable, accurate, reliable, and stable in performance, with strong anti-interference capabilities. It is indispensable in scenarios such as battery production, battery installation, equipment production, and equipment maintenance.
The analyzer is controlled by a microprocessor and equipped with a 16-bit ADC internally to accurately detect battery internal resistance, voltage, and temperature. It operates without stopping the UPS system during measurement, using AC low-resistance measurement and noise reduction technology. This allows measurements to be conducted without interrupting the normal operation of the equipment being tested, significantly reducing testing time. Additionally, it includes data storage, bar graph display, data upload to computers, and wireless measurement and data retrieval via Bluetooth connection with smart devices such as computers, smartphones, and tablets.
| Measurement | Maximum Display | Maximum Resolution | Testing Accuracy |
|---|---|---|---|
| 0.000 mΩ ~ 3 Ω | 3.100 Ω | 1 uΩ | ±0.5 % |
| Measurement | Maximum Display | Maximum Resolution | Testing Accuracy |
|---|---|---|---|
| 0.000 V ~ 70 V | ±71.00 V | 1 mV | ±0.2 % |
| Measurement | Maximum Display | Maximum Resolution | Testing Accuracy |
|---|---|---|---|
| -10.0°C ~ 60.0°C | 60.0°C | 0.1°C | ±1.0°C |
| Functions | Battery internal resistance, battery voltage, temperature |
| Accuracy Assurance for Temperature and Humidity | 23°C ± 5°C, below 75% RH |
| Power | DC 3.7 V lithium battery |
| Resistance Resolution | 1 uΩ |
| Voltage Resolution | 1 mV |
| Temperature Resolution | 0.1°C |
| Measurement Ranges | Internal Resistance: 0.000 mΩ to 3.100 Ω (4 ranges) Voltage Measurement: 0.000 V to ±71.00 V (2 ranges) Temperature Measurement: -10.0°C to 60.0°C (single range) |
| Maximum Input Voltage | DC 70 V (+ measurement terminal to - measurement terminal), no AC input allowed |
| Measurement Method | Internal Resistance Measurement: 1 kHz AC 4-terminal test method, open circuit terminal voltage 3 V max Measurement Current: 2.0 mA to 200 mA (varies with range settings) Temperature Measurement: NTC temperature sensor (10 KΩ at 26°C) A/D Conversion Method: Successive approximation type Display Update Rate: 5 times per second |
| Response Time | 200 ms |
| Measurement Time | Approximately 2 seconds |
| LCD Size | 70.1 mm × 52.6 mm / 3.5 inches (320 × 240 resolution, 16-bit color screen) |
| Instrument Dimensions | Length × Width × Height: 190 mm × 121 mm × 51 mm |
| USB Interface | Includes USB interface for data storage, upload to computer, and saving for printing |
| Bluetooth Connection | Yes |
| Hold and Storage Functions | Manual hold and storage, automatic hold and storage |
| Measurement Judgment Function | Preset PASS, WARNING, FAIL threshold judgments |
| Battery Voltage | Displays 5 levels of battery capacity, alerts for low battery voltage to prompt charging |
| Auto Power Off | Automatic shutdown after approximately 15 minutes of inactivity (can be disabled in settings) |
| Power Consumption | 300 mA MIN / 500 mA MAX |
| Weight | Instrument: 480 g (including battery) |
| Operating Temperature and Humidity | -10°C ~ 40°C; ≤ 80% RH |
| Storage Temperature and Humidity | -20°C ~ 60°C; ≤ 70% RH |
| Insulation Resistance | ≥ 20 MΩ (between circuit and housing at 500 V) |
| Withstand Voltage | AC 3700 V/RMS (between circuit and housing) |
| External Magnetic Field | < 40 A/m |
| External Electric Field | < 1 V/m |
| Compliance with Safety Standards | IEC 61010 |
We are an integrated trade and manufacturing company with our own factory.
Yes, we accept OEM/ODM/OBM and can customize the built-in software of the product according to the customer's special requirements.
In normal circumstances, products in stock can be received within 5 to 7 days via the fastest international express. Other situations may vary depending on the quantity of products ordered, whether there are special customization requirements, and the delivery time chosen.
We have professional internal and external packaging to ensure the safety and stability of the products during transportation. For fragile or other special parts, we will include an extra set to ensure that the customer can use the product immediately upon receipt.
For quality issues that are not caused by human error, we provide a one-year warranty from the time the product is delivered, and lifetime technical support. Other after-sales issues will be addressed by our professional technical staff within 24 hours. The product comes with a user manual and an operation video.
